Indexing plungers, stainless steel for Hygienic USIT® seal and...

go back

Products
- Product overview
  - Flexible standard component system
    - Spring plungers Indexing plungers Stops Centring/positioning components Ball lock pins T-slot nuts
      - Indexing plungers
        Indexing plungers, stainless steel for Hygienic USIT® seal and shim washers, with stainless steel mushroom grip
        Indexing plungers, stainless steel for Hygienic USIT® seal and shim washers, with stainless steel mushroom grip

Item description/product images

DescriptionProduct description:

Indexing plungers are used where it is necessary to prevent changes of position due to lateral forces. A new locking position can be set only after the plunger has been manually retracted. Form C (with lockout slot) is recommended for applications where the indexing pin should remain disengaged for an extended period and be prevented from springing back.

This indexing plunger is suitable for the foodstuff sectors. It has a conical collar so that the fastening point can be hygienically sealed using the Hygienic USIT^® sealing and shim washer. The surface finish is Ra < 0.8 µm, which prevents dirt particles from adhering and ensures easy cleaning.

Material:

Steel parts stainless steel 1.4404.
Seal 75 EPDM 295 (black) or 75 Fluoroprene^® XP (blue).

Version:Indexing pin hardened or not hardened, bright.Temperature range:

75 EPDM 295: -40 °C to 150 °C.

75 Fluoroprene^® XP: -15 °C to 200 °C.

Advantages:Hygienic conform design
Stainless steel 1.4404
Suitable for CIP/SIP cleaning
Resistant to polar and nonpolar media as well as aromatic substances
Certified according to DGUV test Accessory:

Hygienic USIT^® seal and shim washers 07300-03.

Supplied with

Indexing plunger including seal and shim washer Hygienic USIT^®.

Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet 03089-20_A Indexing plungers, stainless steel for Hygienic USIT® seal and shim washers, with stainless steel mushroom grip

222 kB

Drawings

Item selection/filter

Order No.	Form	Main material	locating pin	Component colour	D	D1	D2	D3	L	L1	L2	L3	Travel S	SW1	Fx30°	Spring force initial pressure F1 approx. N	Spring force final pressure F2 approx. N	Price
03089-20-0110601	A	stainless steel	hardened	black	6	M10	33	22,3	63,5	11	14	1,5	6	12	1,8	40	45	on request
03089-20-0110611	A	stainless steel	hardened	black	6	M10x1	33	22,3	63,5	11	14	1,5	6	12	1,8	40	45	on request
03089-20-0120801	A	stainless steel	hardened	black	8	M12	33	26,6	69,5	13	16	1,5	8	12	2,3	40	62	on request
03089-20-0120811	A	stainless steel	hardened	black	8	M12x1,5	33	26,6	69,5	13	16	1,5	8	12	2,3	40	62	on request
03089-20-0110602	A	stainless steel	hardened	blue	6	M10	33	22,3	63,5	11	14	1,5	6	12	1,8	40	45	on request
03089-20-0110612	A	stainless steel	hardened	blue	6	M10x1	33	22,3	63,5	11	14	1,5	6	12	1,8	40	45	on request
03089-20-0120802	A	stainless steel	hardened	blue	8	M12	33	26,6	69,5	13	16	1,5	8	12	2,3	40	62	on request
03089-20-0120812	A	stainless steel	hardened	blue	8	M12x1,5	33	26,6	69,5	13	16	1,5	8	12	2,3	40	62	on request
03089-20-1110601	A	stainless steel	not hardened	black	6	M10	33	22,3	63,5	11	14	1,5	6	12	1,8	40	45	on request
03089-20-1110611	A	stainless steel	not hardened	black	6	M10x1	33	22,3	63,5	11	14	1,5	6	12	1,8	40	45	on request
03089-20-1120801	A	stainless steel	not hardened	black	8	M12	33	26,6	69,5	13	16	1,5	8	12	2,3	40	62	on request
03089-20-1120811	A	stainless steel	not hardened	black	8	M12x1,5	33	26,6	69,5	13	16	1,5	8	12	2,3	40	62	on request
03089-20-1110602	A	stainless steel	not hardened	blue	6	M10	33	22,3	63,5	11	14	1,5	6	12	1,8	40	45	on request
03089-20-1110612	A	stainless steel	not hardened	blue	6	M10x1	33	22,3	63,5	11	14	1,5	6	12	1,8	40	45	on request
03089-20-1120802	A	stainless steel	not hardened	blue	8	M12	33	26,6	69,5	13	16	1,5	8	12	2,3	40	62	on request
03089-20-1120812	A	stainless steel	not hardened	blue	8	M12x1,5	33	26,6	69,5	13	16	1,5	8	12	2,3	40	62	on request