Steel spur gears, module 6, milled toothing, straight-tooth...

go back

Products
- Product overview
  - Systems and components for machine and plant construction
    - Drive technology
      - Gears / Gear Racks / Bevel Gears
        Spur gears in steel, module 6 toothing milled, straight teeth, engagement angle 20°
        Steel spur gears, module 6, milled toothing, straight-tooth design, 20° engagement angle, Form A, with hub

Item description/product images

DescriptionMaterial:Steel 1.0503 (C45).Version:Milled toothing, straight teeth.
Engagement angle 20°, bright.Note:The spur gears have a centre bore or are pre-drilled (this may vary depending on the manufacturing process). For this reason, the dimension D2 max. given in the table is the maximum diameter of the bore that the spur gears are supplied with. This pilot hole/centre bore can be customised with a reamed hole, reamed hole with keyway or a tapped hole by the customer.
In order to achieve exact concentricity between the toothing and the bore, we recommend enlarging the pilot hole to the required diameter on a lathe. Alternatively, bushes can be fitted by the customer to reduce the diameter.Drawing reference:

Form A: with hub
Form B: without hub

Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet 22400_A Steel spur gears, module 6, milled toothing, straight-tooth design, 20° engagement angle, Form A, with hub

205 kB

Drawings

Item selection/filter

Order No.	Form	B	D	D1	D2 max.	D3	L	No. of teeth	Price
22400-0160600012	A	60	84	72	20	54	80	12	on request
22400-0160600013	A	60	90	78	20	60	80	13	on request
22400-0160600015	A	60	102	90	20	70	80	15	on request
22400-0160600016	A	60	108	95	20	75	80	16	on request
22400-0160600018	A	60	120	108	20	80	80	18	on request
22400-0160600020	A	60	132	120	20	90	80	20	on request
22400-0160600024	A	60	156	144	25	110	80	24	on request
22400-0160600025	A	60	162	150	25	110	80	25	on request