Clamp fittings DIN 3015-3 double with smooth inner face,...

go back

Products
- Product overview
  - Flexible standard component system
    - Fasteners Ball-end thrust screws Thrust screws and thrust pads Grippers Torque bolts Threaded inserts Lifting bolts Swivel bales Ring bolts
      - DIN 3015 clamp fittings
        Clamp fittings DIN 3015-3 double with smooth inner face, non-compressing

Item description/product images

DescriptionMaterial:Polypropylene PP.Version:GreenNote:DIN 3015-3 double clamp fittings with smooth inner face, non-compressing Recommended for securely fastening two parallel running hoses or cables. Smooth inner surfaces and outlet radii prevent damage to hoses and cables.

Preferably used as a floating clamp where the line is not compressed between the clamp halves. Select a clamp with diameter (D1) that is slightly larger than the diameter of the pipe to be secured.

The upper and lower clamp halves are identical. Supplied in pairs.Technical data:The specified screw tightening torques refer to installation with a cover plate and DIN EN ISO 4014/4017 hex head screws.Temperature range:-30 °C to +90 °CAssembly:The recommended clamp spacings (A) are guidelines and apply to static loads.

Pipe bends: When installing pipe bends, the clamps must be placed directly in front of and behind the bend.

Fittings: The first clamp should be mounted immediately after the fitting to isolate the fitting from vibrations.

Valves: If valves are integrated into the pipeline, a clamp should be fitted in front of and behind the valve.Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet 07842-01 Clamp fittings DIN 3015-3 double with smooth inner face, non-compressing

391 kB

Drawings

Item selection/filter

Order No.	Form	Size	D for screw	D1 (mm)	D1 (inches)	A (metres)	B	H	L = length	L1	Tightening torque (polypropylene) (Nm)	Tube nom. diameter (inch)	Price
07842-01-1006411	B	1	M6	6,4	1/4	1	30	26,5	36	20	5	-	on request
07842-01-1009511	B	1	M6	9,5	3/8	1	30	26,5	36	20	5	-	on request
07842-01-1010011	B	1	M6	10	-	1	30	26,5	36	20	5	1/8	on request
07842-01-1012011	B	1	M6	12	-	1	30	26,5	36	20	5	-	on request
07842-01-2012711	B	2	M8	12,7	1/2	1	30	26	53	29	12	-	on request
07842-01-2013511	B	2	M8	13,5	-	1,2	30	26	53	29	12	1/4	on request
07842-01-2014011	B	2	M8	14	-	1,2	30	26	53	29	12	-	on request
07842-01-2015011	B	2	M8	15	-	1,2	30	26	53	29	12	-	on request
07842-01-2016011	B	2	M8	16	5/8	1,2	30	26	53	29	12	-	on request
07842-01-2017211	B	2	M8	17,2	-	1,2	30	26	53	29	12	3/8	on request
07842-01-2018011	B	2	M8	18	-	1,2	30	26	53	29	12	-	on request
07842-01-3019011	B	3	M8	19	3/4	1,2	30	36,5	67	36	12	-	on request
07842-01-3020011	B	3	M8	20	-	1,2	30	36,5	67	36	12	-	on request
07842-01-3021311	B	3	M8	21,3	7/8	1,2	30	36,5	67	36	12	1/2	on request
07842-01-3022011	B	3	M8	22	-	1,2	30	36,5	67	36	12	-	on request
07842-01-3025011	B	3	M8	25	-	1,5	30	36,5	67	36	12	-	on request
07842-01-3025411	B	3	M8	25,4	1	1,5	30	36,5	67	36	12	-	on request
07842-01-4026911	B	4	M8	26,9	-	1,5	30	38	80	45	12	3/4	on request
07842-01-4028011	B	4	M8	28	-	1,5	30	38	80	45	12	-	on request
07842-01-4030011	B	4	M8	30	-	1,5	30	38	80	45	12	-	on request
07842-01-5032011	B	5	M8	32	1 1/4	1,5	30	52	106	56	8	-	on request
07842-01-5035011	B	5	M8	35	-	2	30	52	106	56	8	-	on request
07842-01-5038011	B	5	M8	38	1 1/2	2	30	52	106	56	8	-	on request
07842-01-5040011	B	5	M8	40	-	2,7	30	52	106	56	8	-	on request
07842-01-5042011	B	5	M8	42	-	2,7	30	52	106	56	8	1 1/4	on request